QUALIFIED PRODUCT LISTING
List correct at 20 April 2011 - please always check with our Technical Department for the most up to date information
Civil Aviation Specifications
| AMS 3095 | Specification for the exterior painting of aircraft, developed for airlines and approved by Airbus and Boeing |
| BMS 10-83 | Boeing Aircraft Company specification for interior decorative coatings for use on metal and plastic |
PSG specialise in the supply of military specified products
Following is a list of both UK and US defence specifications which we can supply, however if you have a specification which is not listed, please do not hesitate to contact our Technical Department who will do their best to identify the required product and, if possible, source it for you. Telephone: +44 (0)1428 651246
UK Military Specifications
|
Def Stan 80-9 |
Paint, Aluminium, Flame Resisting, Air-Drying Types: Brushing & Spraying |
|
Def Stan 80-15
|
Paint, Pre-Treatment Primer (Etching Primer) Types: Brushing (Base and Acid Component) Spraying (Base and Acid Component ) (Specification obsolescent, replaced mainly by BS X 32 except where brushing version is required) |
|
Def Stan 80-25 |
Paint, Ammunition Finishing , Stoving Spraying & Dipping Types:Semi-Gloss Matt |
|
Def Stan 80-27 |
Paint, Ammunition Finishing, Brushing, Spraying,and Dipping Types: Semi-Gloss Matt |
|
Def Stan 80-31 |
Paint, Finishing, General Service, Aluminium Type: Brushing/Spraying |
|
Def Stan 80-37 |
Paint, Finishing, Cellulose Nitrate, Oil-Resisting Types: Brushing, Spraying |
|
Def Stan 80-38 |
Thinners for Paint Epoxy Two-Pack, Cellulose Nitrate Paints, Dopes and Lacquers |
|
Def Stan 80-54 |
Paint, Finishing, General Service, Gloss |
|
Def Stan 80-56 |
Paint, Finishing Epoxide, Stoving, Black, for Small Arms, Spraying |
|
Def Stan 80-67 |
Solvent, Cleaning, for Painting Equipment |
|
Def Stan 80-68 |
Paint, Marking Types: Brushing, Brush Stencilling, Spray Stencilling,Silk Screen Stencilling, Ink Jet Spraying |
|
Def Stan 80-99 |
Thinners, for Paint Finishing, Acrylic, Spraying Quality |
|
Def Stan 80-122 |
Powder Coating, High Durability, Stoving |
|
Def Stan 80-128 |
Paint, Finishing, Temporary Camouflage, Alkali-Removable for Aerospace Use |
|
Def Stan 80-129 |
Varnish, Electrical Insulating, Brushing. Type 1: Standard. Type 2: Fungicidal |
|
Def Stan 80-138 |
Varnish, Polyurethane, Two-Pack. Types: Matt Gloss |
|
Def Stan 80-141 |
Paint, Finishing, Matt Black, Heat Resisting. Types: Brushing, Spraying |
|
Def Stan 80-161 |
Paint, Finishing, Spraying, Epoxy, Multi-Pack |
|
Def Stan 80-164 |
Paint System, Fluorescent |
|
Def Stan 80-178 |
Paint, Finishing Micaceous Iron Oxide |
|
Def Stan 80-206 |
Paint, Priming, Zinc Phosphate, Non-Aircraft Use, Low VOC Single or Multi-Pack |
|
Def Stan 80-207 |
Paint, Priming, Zinc Chromate, Non- Aircraft Use Low VOC Single or Multi-Pack |
|
Def Stan 80-208 |
Paint, Finishing, Polyurethane Multi-pack, Matt, IRR, Chemical Agent Resistant, Non Aircraft Use, Low VOC |
|
Def Stan 80-209 |
Paint, Finishing, Polyurethane Multi-Pack, Gloss, Chemical Agent Resistant, Non Aircraft Use, Low VOC |
|
Def Stan 80-213 |
Paint, Finishing, Polyurethane, Two-Pack, Anti-Slip, for Land Vehicles, Low VOC |
|
Def Stan 80-214 |
Paint, Finish, Selectively trippable, Acrylic Types:Brushing Spraying |
|
Def Stan 80-216 |
Paint, Filler, Spraying, Epoxy, Multi-Pack |
|
BSX 32 |
Aerospace Series - Pretreatment Etch Primer for Aerospace Purposes |
|
BSX 33 |
Aerospace Series - Two Component Epoxy Primer for Aerospace Purposes |
|
BSX 34 |
Aerospace Series - Two Component Polyurethane Finish for Aerospace Purposes |
US Military Specifications
|
MIL-DTL-53039B Type III |
Single Component Aliphatic Polyurethane, 180g/litre VOC, Chemical Agent Resistant Coating, flattened with polymeric agents |
|
MIL-DTL-53039B, Type IV |
Single Component Aliphatic Polyurethane, 120g/litre VOC, Chemical Agent Resistant Coating, flattened with polymeric agents |
|
MIL-DTL-53039B, Type V |
Single Component Aliphatic Polyurethane, 60g/litre VOC. Chemical Agent Resistant Coating, flattened with polymeric agents |
|
MIL-DTL-64159, Type II |
Waterborne Polyurethane Chemical Agent Resistant Coating, flattened with polymeric agents |
|
MIL-P-53022B, Type II |
Lead and Chromate Free Epoxy Primer, High Solids, 420g/litre VOC |
|
MIL-P-53022B, Type III |
Lead and Chromate Free Epoxy Primer, High Solids, 340g/litre VOC |
|
MIL-P-53030A |
Waterborne Epoxy Primer |
|
MIL-PRF-22750F |
High Solids Epoxy Topcoat |
|
DOD-P-15328D |
Metal Wash Primer, (Formula 117) |
|
MIL-C-8514C |
Pretreatment Wash Primer |
|
MIL-PRF-85285D, Type II, Class H |
High Solids Polyurethane Topcoat, 2.8 VOC, for Ground Equipment |
|
MIL-PRF-23377J, Type I and II, Class C |
Chromated Epoxy Polyamide Primer |
|
MIL-T-81772B, Type I |
Urethane Thinners |
|
MIL-T-81772B, Type II |
Epoxy Thinners |